B1210-36
$301.70
Projection: 12″
Height: 10″
Length: 38″
Weight: 195lbs
Finish: Powder Coated
DRAWING
End Angle Options include:
- Standard – 90° angles on each end for anchor mounting
- P1 – Flat plate on one end for welding, 90° angle on the other for anchor mounting
- P2 – Flat plates on both ends for weld only mounting
Mid Angle Options include:
- AD-1 – For anchorage to the lower dock face
- AD-2 – For anchorage to the dock floor
- AD-3 – For anchorage to the dock floor and face
- AD-T – For anchorage to curb angle and dock face
- Description
- Additional information
- Reviews (0)
- Return Policy
Description
Laminated Dock Bumper Model: B1210-36
12″ thick x 10″ high x 38″ long
Key Features
Great for facilities with heavy dock traffic.
- American Manufactured
- Withstand years of punishment and provide greatest protection even with consistent pounding and abuse.
- Ultimate protection from fabric reinforced rubber pads
- Pads made from recycled bias-ply bus and truck tires
- Woven on steel rods
- Manufactured under pressure exceeding 1500 pounds
- Shown to absorb over 80% of impact
- Anchor bolts protected by at least 3″ of rubber to prevent damage
- Performs on any truck dock under any weather condition or prolong exposure
- 5 year maintenance free warranty.
Angle Options include:
- Standard – 90° angles on each end for anchor mounting
- P1 – Flat plate on one end for welding, 90° angle on the other for anchor mounting
- P2 – Flat plates on both ends for weld only mounting
Mid Angle Options include:
- AD-1 – For anchorage to the lower dock face
- AD-2 – For anchorage to the dock floor
- AD-3 – For anchorage to the dock floor and face
- AD-T – For anchorage to curb angle and dock face
Finish Options include:
- Powder Coated Black – In Stock to 1 week lead time
Additional information
Weight (lbs) | 195 lbs |
---|---|
Shipping Dimensions | 36 × 12 × 10 in |
Angle Options | Standard, P1, P2 |
Finish | Powder Coated |
Mid Angle Options | AD-3, AD-1, AD-2, AD-T |
Be the first to review “B1210-36”
An RGA (Return Goods Authorization) number must be obtained prior to return. Request for RGA must be accompanied by a time-stamped photo of the item to be returned. The RGA number must be noted on the product being returned.
Eligible for return: Standard products in like-new, unused condition or items which qualify for a warranty return. Freight for the return is the responsibility of the customer unless there is an error by Porter Industrial Supply.
Porter Industrial Supply in its sole discretion will determine eligibility for return. Items which have already been shipped cannot be canceled and the freight is the responsibility of the customer if the product is returned. A restocking charge of up to 30% will be made on all merchandise except as allowed under warranty claims.
Claims for loss or damage due to the carrier must be handled by the entity paying for the freight. Items damaged by the carrier but received and accepted “as is” will not be eligible for a return.
Custom, special, worksheet-required, or products labeled online as “Available on backorder” are not eligible for return.
Reviews
There are no reviews yet.